Question:
Can I clone BMW N62 2008 DME using Yanhua ACDP2 via OBD?
ACDP2.EU engineer replied:
N62 MEV9.2 and MEV9.2.2 are supported via Boot.
OBD is not supported.
Follow the guide below to connect properly:
1.Prepare Mini ACDP2, OBP+ICP adapter, ACDP MEV9 DME Clone Interface Board and DME module.
2.Check the DME model carefully according to the picture
3.Check the DME model test points position diagram
4. Install MEV9 interface board and secure the stud.
5.Connect ACDP2, OBP+ICP adapter, Yanhua MEV9 Interface board and DME module.
www.acdp2.eu
